The arrow on the right hand side shows the wrong connected (port 23)
The correct port to be connected is on the left hand side (port 3)
The reason why the ping from DMZ and Remote client doesn't work is because the connected PC is plugged to the wrong port in the switch. Therefore the client are in different vlan, this result ping as unsuccessfully as no trunking was done.
The PC used to ping was connected to port 23, which is under VLAN 10 used for Internet access.
The supposed port to be connect was port 3 which was VLAN 40. therfore the client connect to port 23 in VLAN 10 could not communicate with the gateway in VLAN 40.
No comments:
Post a Comment